Ccd Camera System

We seem to have crossed the frontier health and the only thing left to conquer is analog or film-based X-ray systems, MRI, CT, ultrasound, PET, bone densitometry, diagnostic mammography and most systems of image data with digital output, ie except the X-ray and fluoroscopy. Most existing systems are still analog and retired X-ray film and / or analog video.

Although most C arcs are produced with digital output capability, the weapons most recent C, X-ray systems and R / F systems have not yet been updated. When we believe that there are now more than X-ray studies makes any other mode of study, we must admit that we are Late in the way of moving to electronic Rad and fluorine. These updates should probably be started before all other institutions in medical today. The sooner the transition to place the earlier savings and productivity improves. So when we ask the question "When to convert X-rays Digital" The answer must be "now" or "as soon as possible. "

There are several reasons why the conversion must take place, but first and foremost, as always, cost savings. The cost of acquisition processing, duplication, archiving and access to the film is enormous. Although the actual cost of the film is relatively cheap, the cost of a film processing, maintenance, replacement, chemicals and facilities in the darkroom are not cheap. Then, the cost of filing and Film storage, retrieval and / or duplication, the film cost more compounds. Now add in the time it takes to process and perhaps back again because of poor quality, and time required to transport the studio for the medical or technical and can probably justify the cost of purchase a numerical solution in less than two years. The last factor is the amount of time saved during the procedure itself, which increases the number of patients may be x-ray in a period of time. Actual performance of a single system can easily accommodate perhaps 8.10 per study hour, probably a 30% increase on a film based on the system.

The most important question is how to do this conversion? If you do not had much time to watch the switchover, you will find that there are very few options. Although the technology has been developed several years ago, continues to evolve and the price keeps changing too. The cheapest and most popular computer radiography (CR). These systems are composed of cassettes / plates phosphorus, a viewer / converter and a PC workstation. Cassettes or plates are inserted into the table or chest bucky, similar to inserting a film cassette.

The plate is exposed to X-rays, remove the tape and inserted into the reader / converter, which tells the exposed plate and produces a digital image. The board is cleared and ready for use again in the same process. The image is available on the workstation for display, transfer to a radiologist and / or transfer to an image file and communication (PACS). Systems CR price range of under-performing systems plate (one test every 60 seconds) to $ 30K-$ 40K systems, high performance (from several plates treated in 30 seconds) to $ 90K-$ 100K.

Although the CR is less costly, time of loading and transporting tapes around, together with a result 30-60 seconds processing time in lost productivity and performance compared to the direct radiography (DR). These systems typically use sensors monitors Dishes are fixed permanently in the table and / or Bucky chest. They are also equipped with a workstation and acquisition / / view manipulation software. The DR process is very quick and easy. X-ray exposure and detector goes off immediately converted into an electronic image Available in 5-15 seconds to see the computer workstation.

However, you must pay for speed and simplicity. A unique panel DR can cost $ 140K $ 100K. If you have a table and stood on his chest and two detectors are needed, you must add another $ 80K or a system Accounting for DR 2 or 3 times more than a new X-ray system, which could cost $ 75K for high performance and great brands. DR fluoro on-site systems are also available to equip the R / F and Angio Systems. These systems are made by adding a camera CCD image intensifier, a computer workstation, acquisition / display software for manipulating and R / S digital surveillance system F. These systems typically cost $ 65K-$ 80K.

While all the proposed solutions are relatively expensive, it is possible to reduce costs. We CDs offer a flat CCD detection system under $ 50K. We sold a lot of CR systems reformed under $ 30K and HD Spot fluoro systems refurbished under $ 40K. We also replaced the old X-ray R / F systems with systems of late model high-frequency (suggested at the transition to digital technology) at half the price of a new system.

What is best DV camcorder in the U.S. around 2000 $ -2900?

Must be a PAL 3 CCD camera XLR BNC focus and zoom (with Optional manual) White Balance (with manual option)

Sorry, just below the price range of consumer DV Cam. The JVC JY-HD10U Cam is the better with the features you want, and more or less the price range you give. If you're lucky, you find a right for about $ 3,400, but is now $ 3995.00 retail. Good luck or wait several months for the price drop after X-Mas.

2000fps CCD Camera

Tweet This Post